燃料系部品Fuel Parts
フューエルカットオフバルブFuel cut off valve

燃料タンクの上部に設定される燃料遮断弁です。
通常時はタンク内のベーパーをタンク外へ逃がしますが、車両制動時や旋回時にはバルブが閉じてタンク外への燃料漏れを防止する機能をもっています。
写真は樹脂製燃料タンクなどに熱板溶着されるタイプになります。他には金属タンクなどに使用されるタイプもあります。
This is the cut off valve installed at the upper potion of the fuel tank.
Normally, vapor in a tank is vented to the outside. When a vehicle breaks or rotates, the valve closes to prevent the fuel from leaking outside the tank.
The photo above shows the valve type that is attached to the resin fuel tank by hot-plate thermal welding . There are other types used for metal tanks.
フィラーネック用バルブValve for filler neck
燃料タンクの給油口に設定される燃料逆止弁です。
燃料給油時のタンク内へ燃料を導入します。
フィラキャップ開弁時に吹き返しをバルブで防止します。
写真は樹脂製燃料タンクなどに熱板溶着されるタイプになります。他には金属タンクなどに使用されるタイプもあります。
This is the fuel check valve installed at the filler neck of the fuel tank.
This valve induces fuel into a tank when fueling, and when the filler cap is opened, it prevents the fuel blow-out .
The photo above shows the valve type that is attached to the resin fuel tank by hot-plate thermal welding . There are other types used for metal tanks.
フューエルチェックバルブFuel check valve
燃料タンク内圧の増加又は減少時、圧力の調整を行う2wayの圧力調整弁です。
又、燃料給油時エバポラインを閉じ、過給油を防止する機能もありまあす。
部品の組み合わせを変更することで多くのタンクレイアウトに適合させることができます
This is the two-way pressure regulating valve for both the increased and decreased inner pressure of the tank.
This has the closing function of evaporation line at
fueling, in order to prevent overfilling of fuel.
By changing combinations of parts, this can be
adapted for many different tank layouts.
モジュール用小型樹脂成形部品Resin molded part for module
フューエルポンプモジュールに用いられる樹脂成形部品です。金属端子をインサート成形したコネクター部分を一体化したものなど、用途に合わせた様々な形体部品を取り扱っております。
These are the resin molded parts used for fuel pump modules. We have a wide range of forms for various purposes, including the part incorporating its connector section that is insert molded with the metal terminal.
樹脂チューブASSY部品Resin tube ASSY part
当社製のバルブ類、クイックコネクター及び樹脂成形品に樹脂製チューブを圧入した部品です。樹脂製チューブは加熱加工により用途に合わせた曲げ形状にする事が出来ます。
Resin tubes are pressed into Piolax valves, quick connectors and resin molded parts . Resin tube can be bent to different forms by thermal processing.
HDPE製小型溶着部品Small welded part made of HDPE
樹脂製タンクなどに熱溶着されるHDPE製樹脂部品です。CLIPやTUBEなどさまざまな用途・形状の部品を取り扱っております。
These are the resin parts made of HDPE. Thermal welding is applied for welding with resin tanks, etc. We have parts such as CLIP and TUBE that can serve the various purposes and forms.
小型メッシュフィルターSmall mesh filter
フューエルインジェクターやトランスミッションなどに組み込まれるメッシュフィルターです。メッシュはナイロンなど樹脂製やSUS製、本体はナイロン製で取り扱い実績があります。
These are the mesh filters to be incorporated into fuel injectors and transmissions. We have mesh made of SUS or resin, such as nylon resin. The body is made of nylon resin.
クイックコネクターQuick connector
AIRや水系などの配管を簡単・確実に接合するクイックコネクターです。用途などに合わせ廉価なタイプや接合強度の高いタイプなど取り扱っております。
These are the quick connectors that connect tubes such as air tubes and water tubes easily and firmly. Depending on your needs, low-priced parts, or parts with high joint strength are available.